| Home | Privacy Policy |
As an Amazon/eBay Associate, I earn from qualifying purchases. Website use conditional on agreeing with Disclaimer
Seal the Chipboard Edges of a Worktop Sink Cutout
Simple and effective sealant for any chipboard/particle board edges against water damage.
THE SOLUTION IS
"Everbuild D4 Woodglue"
Quick to apply, easy to wipe off excess and dries in ten minutes. Leaves a long lasting waterproof edge to your worktop.
When cutting out a worktop for a sink, it is always a worry that some water may eventually find its way under the sink edges and soak into the worktop. A simple method of sealing the worktop against any ingress of moisture is acomplished with a waterproof wood adhesive. A couple of thick coats will leave your chipboard totally waterproof.
Everbuild D4 Wood Adhesive is a solvent free industrial grade D4 wood adhesive based on the latest hybrid resin technology. Excellent rate of bond strength development & water resistance, suitable for constant water immersion.
Seal your Worktop Edges with Everbuild D4 Waterproof Adhesive
METHOD OF USE
Once you have completed the cutout for your inset sink, apply the adhesive liberally to the bare edge so that it soaks into the material, any spillage or excess in unwanted areas may be wiped off with a damp cloth. Wait ten minutes or dry to the touch and reapply. Two or three coats is sufficient for a truly waterproof surface.
It is also advisable to seal the rear edge of the worktop that sits against the wall directly behind the sink, this is where water can easily get past any tile grout or sealant and soak into your worktop, rotting it over time.
Seal your Worktop Edges with Everbuild D4 Waterproof Adhesive
MORE PRODUCT DETAILS
-
D4 Wood Adhesive is a solvent free industrial grade D4 wood adhesive based on the latest hybrid resin technology. Excellent rate of bond strength development & water resistance, suitable for constant water immersion
-
It provides the user with a waterproof D4 grade wood adhesive with none of the safety issues associated with conventional isocyanate containing (polyurethane) D4 grades
-
Can be used internally and externally and gives a high strength, water, impact and temperature resistant bond that is usually stronger than the wood itself
-
Ideal for all general woodworking and joinery uses, assembly line work, RF/HF cure systems, wood on wood laminating, furniture assembly and household DIY use
-
Dries clear for a professional looking finish. Cleans up easily with water for simple removal of unwanted application or removal of excess. Note: Date mentioned on product are manufacturer date not expiry date
TAGS
|
Seal Kitchen Worktop| Seal Sink Cutout | Waterproof Kitchen Worktop Edge | Seal the Edge of Kitchen Worktop |
Use of this website is conditional on the reading and agreeing with the Disclaimer,
if you do not agree with the Disclaimer then please leave the site. By making use of this site you are agreeing to the Disclaimer.
Sunamoon.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.co.uk When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Copyright Sunamoon.com 2020
|